Re: QS8 LCD

[ Follow Ups ] [ Post Followup ] [ The QuadraSynth Forum ] [ FAQ ]

Posted by Narfman on November 27, 2006 at 13:21:59:

In Reply to: QS8 LCD posted by Matias Almeida on November 26, 2006 at 10:43:24:


Hi Matias,
If you email me I'll send the schematics to you. I can see the 16 pins for the display. I don't have a schematic for the display but the cable is straight through to connect it to the board.
Let me know, Narfman96 at Yahoo dot com

: Hi ppl. I know this is an old issue, and I´m sure many ppl have got this right, and many ppl haven´t.
: Well, I haven´t been able to make mine work.
: After many tries, and analysing the pinout, i´ve found that i had to switch pins 1 and 2, maybe my lcd pinout is different. So I didn´t quit yet, and I´ll try a few more things, but, in the mean time, could someone that has successfully made a new cabe post the pinout from the QS8 board, and the LCD, or some pictures? Or a schematic for QS8 mainboard LCD.
: Thanks

: Matias




Follow Ups:



This is the old QS-Forum Archive
Please post messages on the new QuadraSynth Forum