Re: About Replacing QS LCD panel

[ Follow Ups ] [ Post Followup ] [ The QuadraSynth Forum ] [ FAQ ]

Posted by Casey Van Tieghem on September 24, 2006 at 12:28:07:

In Reply to: Re: About Replacing QS LCD panel posted by Ben Weaver on April 24, 2006 at 07:27:54:

Make sure that you don't cross pins 1 and 2, those remain the same.
: It's not going to help much, but that's the classic symptom of having the wrong wires going to the wrong places. (Or possibly a dead new display, but I'd go for the wires first.)

: : Hello, years ago in this message board paul wrote how to replace QS LCD panel.

: : I've constructed a cable, crossed the pins etc. Got the contrast and backlight working, but my synth (qs7) goes silent/hisses when the new display is connected. The display shows the default HD44780 all solid bars across the top line for not initializing. If I plug in the old dead display, everything is fine (execpt displaying characters)

: : Anyone here know how to solve this. Please help

Follow Ups:

This is the old QS-Forum Archive
Please post messages on the new QuadraSynth Forum