ALESIS SERIAL PORT DRIVER FOR WINDOWS 95/98 version: 3.04 February 1999 ========================================================= Please see ASDWIN.HLP for more detailed help. ========================================================= The Alesis Serial Port Driver for Windows 95/98 (ASDWIN98) is used to send and receive midi data to and from your Alesis Synthesizer via the QS Serial Port. At the time of this writing, Alesis Synthesizers equipped with the QS Serial Port are: NanoSynth, QS6, QS6.1, QS7, QS8, or QSR Refer to your owner's manual for more info on the serial port. This distribution contains the following files: ASDWIN.DRV ASDWIN.VXD ASDWIN.INF ASDWIN.HLP ASDWIN.CNT README.TXT (you are reading this) If you are missing any of these files, please re-download at www.alesis.com or www.alesis-synth.com/software/ or contact Alesis Technical Support. NOTE: IF HAVE AN OLDER VERSION OF ASDWIN (Prior to ver 3.00) BE SURE TO REMOVE THE OLDER VERSION BEFORE INSTALLING THIS VERSION. If you have an older version of 3.00 or higher, you may simply "Update the Driver". ********************************************************* CONTENTS ********************************************************* To install, update, or remove this driver, see the following instructions for the version of Windows you are using. Be sure to read the Notes below regarding parameter settings of the Driver. Sections of this document (1) Installation of the Alesis Serial Port Windows Midi Driver 2 sections: Win95, Win98 (1b) Updating the driver (2) Changing driver parameters after installation (3) Description of the driver parameters (4) Updating the driver (5) Removing the driver ********************************************************* (1) INSTALLING THE ALESIS SERIAL PORT WINDOWS MIDI DRIVER ********************************************************* NOTE: IF HAVE AN OLDER VERSION OF ASDWIN (Prior to ver 3.00) BE SURE TO REMOVE THE OLDER VERSION BEFORE INSTALLING THIS VERSION. If you have an older version of 3.00 or higher, you may simply "Update the Driver". SETUP FOR WINDOWS 95 ===================== -Go to the Settings item in the Start Menu. -Select the "Control Panel" item -Select "Add New Hardware" -Select "NO" (do NOT have windows auto-detect hardware) -Select "Sound, Video, Game contollers" as hardware type. -When prompted for device, select "Have Disk" -Navigate to the ASDWIN.INF file in the ASDWIN directory -Follow the Win95 instructions. -When the Alesis Serial driver settings dialog appears, select the COM port that the QS synth is attached to. SETUP FOR WINDOWS 98 ===================== -Go to the Settings item in the Start Menu. -Select the "Control Panel" item -Select "Add New Hardware", this will start the New Hardware Wizard -Select "Next". -Select "Next" again, Windows wants to search for Plug and Play Hardware first. -If the Hardware Wizard finds something, it will display a list, if so, just select "No, the device isn't in the list" -Select "Next". -Select "NO" (do NOT have windows try to auto-detect hardware) -Select "Next". -Select "Sound, Video, Game contollers" as hardware type. -Select "Next". -When prompted for device, select "Have Disk" -Navigate to the ASDWIN.INF file in the ASDWIN directory -Follow the Win98 instructions. -When the Alesis Serial driver settings dialog appears, select the COM port that the QS synth is attached to. ********************************************************* (1b) UPDATING THE DRIVER ********************************************************* -Go to the Settings item in the Start Menu. -Select the "Control Panel" item -Select "System" to open the system applet -Select the "Device Manager" tab -Under "Sound, Video, Game contollers" select the "Alesis Serial Midi Interface Driver" -Select the "Properties" button -Select the "Driver" tab -Click the "Update Driver" button -The Update Device Driver Wizard appears click "Next" -Choose to Display a List of all Drivers click "Next" -The Alesis Serial MIDI Driver should be showing, if not you need to install it (see above section) -Click the "Have Disk" button -Browse to the location where the new ASDWIN driver files are located (finding ASDWIN.INF), Select OK. -Click OK to accept this location -The Alesis Serial MIDI Driver is now listed in the Select Device Window. Select OK. -Depending upon the version you are updating from, you may receive warning messages about the version and/or compatibility of the driver. Just select PROCEED or OK or YES at these warnings if you get them. -The driver is now shown in the Update Device Wizard select "Next". -Select Finish. ********************************************************* (2) CHANGING THE DRIVER PARAMETERS AFTER INSTALLATION ********************************************************* LOCATING THE DRIVER IN WINDOWS 95 / 98 ====================================== -Go to the Settings item in the Start Menu. -Select the "Control Panel" item -Select "System" to open the system applet -Select the "Device Manager" tab -Under "Sound, Video, Game contollers" select the "Alesis Serial Midi Interface Driver" -Select the "Properties" button -Select the "Settings" tab Alternately: ----------- -Go to the Settings item in the Start Menu. -Select the "Control Panel" item -Select "Multimedia" to open the multimedia applet -For Windows 95 select the "Advanced" tab, for Windows 98 select the "Devices" tab -Under "Midi Devices and Instruments" select the "Alesis Serial Midi Interface Driver" -Select the "Properties" button -Select the "Settings..." button -now the Alesis Serial MIDI Driver Setup window is open -for a description of the parameters, refer to the next section of this document.