Re: Half-a-display on a QS7

[ Follow Ups ] [ Post Message ] [ The QuadraSynth Forum ] [ FAQ ]

Posted by Miklin Halstead on January 17, 1998 at 22:04:50:

In Reply to: Re: Half-a-display on a QS7 posted by Jeff Tubaugh on January 06, 1998 at 19:06:13:

: I took the keyboard to the music store today to have it sent back to Alesis. While I was there I talked to another guy who had similar problems with the displays on (if I remember correctly) the D4 drum machine. I just hope I don't regret buying a really great sounding synth simply because I can't depend upon the display! Good luck with your keyboard, Jeff!

I don't (yet) have a QS, but in Yamaha stuff and many other LCD displays, the signal gets from the circuit board to the LCD panel through a sort of rubbery conductive strip on each side, and it depends on being tightly sandwiched between the circuit board and the plastic faceplate. If one or two mounting screws are loose, you get half a display.

If opening the box is something you and your warranty would let yourself do, a gentle tightening of LCD mounting screws might do the trick. Did I mention gentle? By the way, be gentle.


Follow Ups: