Posted by Bob on April 01, 2001 at 22:08:18:
In Reply to: Re: Roland M-512E ram card with QS7?? posted by Rod on March 30, 2001 at 19:30:03:
: I wouldn't just try it. You may actually damage something. Not too familiar with SRAM cards, but here's an example.
: Yamaha cs6x uses 3.3 v smartmedia card. Stick in a 5 v card (looks the same) and you can screw up the synth for good.
: Check out the specs carefully.
: Rod
Smartmedia cards are different than sram or the Roland ram cards.These all use 3-volt CR2325 batteries to retain memory.As long as the pins match you should be ok.