Re: Problem with looped samples - QS8

[ Follow Ups ] [ The QuadraSynth Forum ] [ FAQ ]

Posted by Robson Luis on January 20, 2001 at 00:12:20:

In Reply to: Problem with looped samples - QS8 posted by Pedro Feij√£o on January 02, 2001 at 19:08:34:


Try modify the loop points in SoundBridge after edit sample in your editor.
e.g: if you are using SoundForge and sample have loop start = 1 and loop end = 300, try modify END point in SoundBridge to 299 or 298.
I have success with this little modifications when burning small samples to my QS7.
Try it!
Hope this help you.


: I've been using Soundbridge to burn .WAV files to my flash ROM card for about a year and never had any problem, but now i've got a problem with looped samples. The loop points are ok, i hear the loop sounding ok in my wav editor but when i burn the sample to the flash card and hear it trough my QS8 it has clicks and pops, like the loop points would have been changed. I've had no problems with bigger looped samples (>1s), they all sounded ok, the problem only appears with small loops (0.1 - 0.2s). Does anybody know what's happening?

: Thanks




Follow Ups: