Re: MIDI help 6.1 and n-track

[ Follow Ups ] [ The QuadraSynth Forum ] [ FAQ ]

Posted by Bob on January 09, 2001 at 13:09:27:

In Reply to: MIDI help 6.1 and n-track posted by Karl Batschke on January 05, 2001 at 23:42:28:


: Hi,

: I'm using the Alesis serial interface between my QS6.1 and my pc. I'm able to receive data and record to my multitrack software (n-track)
: My problem is this:
: When I select the QS as the MIDI output port, I get nothing, no sound from the pc speakers, and no sound from the keyboard. I've turned MIDI to ON on the keyboard and selecte THRU for the output port on the keyboard based on what I read in the manual.
: The only time I get playback sound on the pc speakers is when I select the Soundcard Synth as the MIDI output device. When I record, I'm not hearing my synth voice, just the default voice 1 general midi of the soundcard synth.
: I'm sure I'm missing something very basic, but I'm expecting I should be able to input from the QS and record IT'S voices as well as play them back.
: I'm beyond the basic I/O issues and into set up issues I believe.

: Some basic info:
: QS6.1
: Serial interface from Alesis COM 1
: GENERAL MIDI = On
: BAUD rate set for PC
: MIDI OUT = THRU

: Multi track software - n-track Studio v2.2

: Thanks for the help,
: Karl

It sounds like the problem is with assigning the out put to Midi. With the QS hooked up to the serial port it won't respond to Midi.For that you need a standard Midi interface and hook up to the Midi ports.I'm not familiar with your multi-track software but you need to see if you can route it to the serial port (com).


Follow Ups: